Here’s everything you need to know about these:
Prosport Universal Adjustable Drop Links
Key Features:
All steel construction
Supplied with a M10-M12 fitment adapter
Reduces strain on OEM – specification components after lowering
Why are they needed?
When lowering a car the position of the anti-roll bar in relation to other suspension components can change, so it increases the chance of components hitting each other.
Additionally, on Coilover Units, the brackets to attach the drop links are often mounted at a lower point on the unit than the OEM position, so on a Coilover unit, this effectively shortens the gap between the bracket and the roll bar itself. In this case, a standard length drop link will try to force the roll bar into a different position.
So, fitting a set of Prosport Shortened Drop Links will help to overcome the following issues:
– Increased strain on the drop link ball joints and mounting bracket
– Accelerated wear on the ball joints
– Contact with drive shafts or other components, causing noise
Fits:
These Prosport Shortened Drop Links will fit most vehicles, except the following:
Not suitable for: A3 Mk1, Leon Mk1, Octavia Mk1, Toledo Mk2, New Beetle, Bora, Golf Mk4
Specifications in Detail:
Makes Links in Three Different Lengths: Short: 150-170mm; Medium 215-235mm; Long 270-290mm
Thread size: M10 with M12 Adapter
Good to Know:
These links are a direct replacement for the OEM parts
Corrosion-resistant finish
Never use an air-ratchet/electric gun or similar to install the nuts. This can damage the ball joints/rubber boots. There are flat edges on the shoulder at the base of the threaded section to enable use of a spanner to hold the shaft while fitting the nut.
In the Box:
RH Threaded Ball Joint x2
LH Threaded Ball Joint x2
80mm Link Bar x2
150mm Link Bar x2
200mm Link Bar x2
Questions:
Although we have tried to include all of the information you’ll need, if you have any questions please send us a message
Kit Number: 130008
Prosport Universal Adjustable Drop Links