2x 30mm Alloy Hub Centric Wheel Spacers for Porsche 911 996 1997-05
1 Pair (axle set) of 30mm hub centric wheel spacers
Made from Aircraft Quality 6061-T6 Aluminium Alloy with Steel Threaded inserts.
Bolts made to ISO 898-1 Specification, Grade 10.9 for high tensile strength.
Porsche 911 996 from 1997-05
Hub / Wheel Centre Bore: 71.6mm
Supplied with M14x1.5 shallow head bolts
Good to know:
6061 Aluminium is an alloy made up of magnesium and silicon which allows for a very light but strong spacer.
T6 is a multi-stage heat treatment procedure that increases the strength of the alloy.
The Spacer is attached to the hub using the shallow-head bolts supplied in the kit, the wheel is then fitted to the spacer with the original wheel bolts.
Always make sure the Spacer mounts on to the face of the hub with no restriction before tightening the bolts.
Only use hand tools to fit and tighten the wheel bolts.
All bolts should be tightened to the vehicle manufacturer's recommended setting and always re-check after 50 miles driving.
Here to help:
Here to Help: If you need any help choosing your Spacers, please get in touch with us.