2x 20mm Alloy Hub Centric Wheel Spacers for Skyline (Type R33) 1993-1998
1 Pair (axle set) of 20mm hub centric wheel spacers
Made from Aircraft Quality 6061-T6 Aluminium Alloy with steel inserted studs
Studs made to ISO 898-1 Specification, Grade 10.9 for high tensile strength.
Skyline (Type R33) from 1993-1998
Hub / Wheel Centre Bore: 66.1mm
Supplied with M12 x 1.25 nuts
Good to know:
6061 Aluminium is an alloy made up of magnesium and silicon which allows for a very light but strong spacer.
T6 is a multi-stage heat treatment procedure that increases the strength of the alloy.
The Spacer is attached to the hub using the shallow-head nuts supplied in the kit, the wheel is then fitted to the spacer with the original wheel nuts.
Always make sure the Spacer mounts on to the face of the hub with no restriction before tightening the nuts.
Only use hand tools to fit and tighten the wheel nuts.
All nuts should be tightened to the vehicle manufacturer's recommended setting and always re-check after 50 miles driving.
Here to help:
Here to Help: If you need any help choosing your Spacers, please get in touch with us.